Sistem Rekomendasi untuk Optimalisasi Pemilihan Petak Makam di TPU menggunakan Metode Simple Additive Weighting Berbasis Web

Alfi Nurfazri; Naldi Nashih Ulwan; Rinto Priambodo

doi:10.32736/sisfokom.v10i1.934

Authors

Alfi Nurfazri Universitas Mercu Buana
Naldi Nashih Ulwan Universitas Mercu Buana
Rinto Priambodo Universitas Mercu Buana

DOI:

https://doi.org/10.32736/sisfokom.v10i1.934

Keywords:

Public Cemeteries, Recommendation Systems, Simple Additive Weighting Methods, City Parks and Forests Service, Provincial Government of the Special Capital Region of Jakarta

Abstract

In life, there is also death, every day the number of people who are born in the world continues to increase followed by the death of a person. The death rate in DKI Jakarta in early 2020 was 3,072 reports and then there was a significant increase in February as many as 5,792 reports. Public Cemetery is an area of land provided for funeral purposes for any person regardless of religion and class. The City Parks and Forests Service of the Provincial Government of the Special Capital Region of Jakarta is a Regional Work Unit in charge of Forestry, Landscaping, and Cemeteries in the DKI Jakarta Regional Work Scope. The amount of time and energy needed in the funeral process for a corpse in DKI Jakarta Province starts from registering the body, selecting the location to the heir to obtain an IPTM from the PTSP. While the burial process must be carried out quickly, especially in certain conditions, such as during the pandemic, where the bodies must be buried immediately and the limited burial ground available. This recommendation system aims to simplify the process of registering bodies, selecting the cemetery, selecting plots, and managing tombs. By using the SAW method in the selection of cemeteries and grave plots, it will optimize burial plots by selecting the best alternative based on predetermined criteria so that it will reduce TPU cases of fullness or unavailability of grave plots.

References

A. Irawan, “Portal Statistik Sektoral Provinsi DKI Jakartaa,” Unit Pengelola Statistik, 2 Juni 2020. [Online]. Available: http://statistik.jakarta.go.id/pelaporan-kematian-periode-januari-desember-2019-dan-januari-april-2020-di-provinsi-dki-jakarta/. [Diakses 18 Oktober 2020].

Y. S. Padang, L. Sumaryanti dan Y. Kolyaan, “SISTEM INFORMASI TEMPAT PEMAKAMAN UMUM TANAH MIRING KABUPATEN MERAUKE BERBASIS WEB,” Musamus Journal Of Research Information and Communications Technology, vol. 1, no. 1, pp. 18-29, 2018.

Restiana, L. Rifani dan I. Inayati, “Sistem Pemesanan Lahan dan Jasa Kebersihan Makam Berbasis Web (Studi Kasus : Tempat Pemakaman Umum Keputih),” Jurnal Universitas Narotama Surabaya, vol. 1, no. 1, pp. 1-9, 2015.

I. Rusdi, I. F. Widy dan H. Husein, “Rancang Bangun Sistem Informasi Tempat Pemakamam Umum Pondok Rajeg Bogor,” Jurnal Teknik Komputer Amik BSI, vol. V, no. 2, pp. 219-226, 2019.

Frieyadie dan T. Kristiana, “Rancang Bangun Sistem Informasi Administrasi Tempat Pemakaman Umum (TPU),” Konferensi Nasional Ilmu Pengetahuan Dan Teknologi, vol. 2, no. 1, pp. 63-68, 2016.

Z. Mazalisa dan Irwansyah, “SISTIM INFORMASI GEOGRAFIS TEMPAT PEMAKAMAN UMUM (TPU) DI WILAYAH KOTA PALEMBANG,” Jurnal Ilmiah MATRIK, vol. 18, no. 3, pp. 271-280, 2016.

H. R. Hatta, M. Rizaldi dan D. M. Khairina, “Penerapan Metode Weighted Product Untuk Pemilihan Lokasi Lahan Baru Pemakaman Muslim Dengan Visualisasi Google Maps,” Jurnal TEKNOSI, vol. 2, no. 3, pp. 85-94, 2016.

A. S. Aji, A. Suprayogi dan A. P. Wijaya, “ANALISIS KESESUAIAN KAWASAN PERUNTUKAN PEMAKAMAN UMUM BARU BERBASIS SISTEM INFORMASI GEOGRAFIS (SIG) (Studi Kasus : Kecamatan Tembalang, Kota Semarang),” Jurnal Geodesi Undip, vol. 4, no. 3, pp. 99-107, 2015.

A. Wulandari, “Kajian Potensi Pemakaman sebagai Ruang Terbuka Hijau Perkotaan,” Langkau Betang Jurnal Arsitektur, vol. 1, no. 2, pp. 54-64, 2014.

GUBERNUR PROVINSI DAERAH KHUSUS IBUKOTA JAKARTA,, “PERATURAN GUBERNUR PROVINSI DAERAH KHUSUS IBUKOTA JAKARTA NOMOR 157 TAHUN 2019 TENTANG ORGANISASI DAN TATA KERJA DINAS PERTAMANAN DAN HUTAN KOTA,” 2019. [Online]. Available: https://pertamananpemakaman.jakarta.go.id/assets/data/data-peraturan/PERGUB-157_TAHUN_2019-TENTANG-SOTK_DINAS_PERTAMANAN_DAN_HUTAN_KOTA.pdf. [Diakses 27 03 2020].

Admin, "Tugas Pokok dan Fungsi," Dinas Pertamanan dan Hutan Kota Provinsi DKI Jakarta, [Online]. Available: https://pertamananpemakaman.jakarta.go.id/v140/t8/4/tugas-pokok-dan-fungsi. [Accessed 27 Maret 2020].

S. N. Rochmawati dan F. Marisa, “Sistem Rekomendasi Rumah Berbasis Web Menggunakan Metode SAW pada PT. Inproperty,” Journal of Information Technology and Computer Science, vol. 3, no. 2, pp. 95-98, 2018.

N. Hasanah dan R. Priambodo, “PERANCANGAN SISTEM PENDUKUNG KEPUTUSAN PRIORITAS PROGRAM KERJA DENGAN METODE SIMPLE ADDITIVE WEIGHTING (SAW),” Jurnal Cendikia, vol. XVIII, pp. 349-358, 2019.

E. Daniati, “SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN KOST DI SEKITAR KAMPUS UNP KEDIRI MENGGUNAKAN METODE SIMPLE ADDITIVE WEIGHTING (SAW),” Seminar Nasional Teknologi Informasi dan Multimedia, vol. 2, no. 2, pp. 145-150, 2015.

F. A. Purnomo, E. H. Prastisto dan A. Z. Nurrizqi, “SISTEM REKOMENDASI PENCARIAN KEAHLIAN MAHASISWA BERDASARKAN CURRICULUM VITTAE DENGAN METODE SIMPLE ADDITVE WEIGHTING (SAW),” Indonesian Journal of Applied Informatics, vol. 2, no. 2, pp. 107-117, 2018.

D. Darmastuti, “IMPLEMENTASI METODE SIMPLE ADDITIVE WEIGHTING (SAW) DALAM SISTEM INFORMASI LOWONGAN KERJA BERBASIS WEB UNTUK REKOMENDASI PENCARI KERJA TERBAIK,” Jurnal Sistem dan Teknologi Informasi, vol. 16, no. 2, pp. 1-6, 2012.

R. S. Pressman, REKAYASA PERANGKAT LUNAK - BUKU SATU, Pendekatan Praktisi ( Edisi 7 ), Yogyakarta: Penerbit ANDI, 2012.

A. Dennis, B. H. Wixom dan D. Tegarden, “Systems Analysis & Design With UML Version 2.0 An Object-Oriented Approach Third Edition,” John Wiley & Sons, Inc., Hoboken, 2009.